5450 Diesel Injector Seal Puller
A specialised tool, used to assist the extraction of the copper washers used to seal diesel injectors where they enter the cylinder head.
- No moving parts to drop into the engine.
- Removes seals with ease.
- Slide hammer assists in extraction.
- Tip diameter: 4.5mm (min) to 13.2mm (max).
- Made in Sheffield.
TSP: £88.18 ex VAT £105.82 inc VAT
Kugelgelenk-Demontagewerkzeug für Front- und Heckstabilisatoren von Volvo (FM12), 43 mm.
- Kugelgelenk-Demontagewerkzeug für Front- und Heckstabilisatoren, 43 mm.
- Einsatzmöglichkeiten u. a.: Volvo-Lkw der Reihe FM12.
- Kugelgelenkabzieher für Front- und Heckstabilisatoren. Aus SCN440-Schmiedestahl
- Entspricht Volvo-OEM 9990814.
- Mit Sicherheitskette.
TSP: £88.18 ex VAT £105.82 inc VAT
Un extracteur conçu spécifiquement pour la rondelle d'étanchéité en cuivre positionnée sous l'injecteur Diesel.
- Aucun risque de débris tombant dans la chambre de combustion
- Extrait le joint en cuivre sans difficulté
- La masse à inertie aide à l'extraction
- Diamètre du filetage : 4.5mm en bout et 13.2 mm maximum
- Fabriqué à Sheffield
TSP: £88.18 ex VAT £105.82 inc VAT
Een speciaal gereedschap om de koperen sluitringen te verwijderen die worden gebruikt om dieselinjectoren af te dichten bij de cilinderkop.
- Geen bewegende delen die in de motor kunnen vallen
- Voor eenvoudige verwijdering van afdichtingen
- Schuifhamer helpt bij de extractie
- Tip-diameter: 4,5 mm minimum aan 13,2 mm maximum
- Gemaakt in Sheffield
TSP: £88.18 ex VAT £105.82 inc VAT
Useful Downloads
Press Release
Diesel Injector Seal Puller
This new Laser Tool (part no. 5450) has been developed to solve the common problem of removing seized and often inaccessible diesel injector copper sealing washers.
These sealing washers sit at the bottom of the injector orifice and are a common failure point. They are so deep into the cylinder head and usually stuck tight with carbon build-up that extraction is usually next to impossible.
That’s where the Laser Diesel Injector Seal Puller comes in; cleverly designed, the tapered and threaded end of the tool is screwed into the copper seal to grip, and then steadily tapped up with the built-in slide hammer. What was a very awkward and difficult job is now achieved in seconds.
Another specialist tool from the tool innovators, Laser Tools. For further details, please contact the Marketing Department: 01926 818196.
As an Amazon Associate I earn from qualifying purchases.
