Spot Weld Cutter Set 9pc Part No. 7048

Typical Price:

£33.52 exc VAT
£40.22 inc VAT

Spot welds are notoriously hard and therefore difficult to drill with normal drill bits. The 7048 Spot Weld Cutter Set contains 5 double ended cutting bits and a cutter shaft that is equipped with a spring loaded centering pin to help guide the cutter and remove the full spot weld using suitable electric or air drill. The 7048 is also supplied with a 8mm high speed Cobalt steel drill bit as well as spare cutter and guide pins.

Additional Information

  • Set includes: Set includes: 1 x 9.5 spot weld cutter shaft, 5 x 9.5 double ended cutter heads, 1 x 8mm HSS/Cobalt drill and 2 x spare guide pins
  • Double ended cutter heads
  • Designed to cut out spot welds using air powered or electric drills.
  • Supplied in a metal case for ease of storage
  • All cutting components are considered consumable – spare parts available: Spot Weld Cutter Shaft 60388, Spot Weld Cutter heads (pack of 5) 60390, Guide pin (pack of 2) 60389, HSS Cobalt Drill 8mm 60362.

Typical Price:

£33.52 exc VAT
£40.22 inc VAT

Spot welds are notoriously hard and therefore difficult to drill with normal drill bits. The 7048 Spot Weld Cutter Set contains 5 double ended cutting bits and a cutter shaft that is equipped with a spring loaded centering pin to help guide the cutter and remove the full spot weld using suitable electric or air drill. The 7048 is also supplied with a 8mm high speed Cobalt steel drill bit as well as spare cutter and guide pins.

Zusätzlichen Informationen

  • Der Werkzeugsatz umfasst: 1x 9,5 Schweißpunktfräser, 5x 9,5 Schneidköpfe, 1x HSS/Kobaltbohrer 8 mm und 2x Ersatzbohrstifte
  • Zum Ausschneiden von Schweißpunkten an Fahrzeugblechen
  • Aufbewahrungskoffer aus Metall
  • Verbrauchsmaterial und nicht von der Laser-Garantie abgedeckt – Ersatzteile verfügbar

Typical Price:

£33.52 exc VAT
£40.22 inc VAT

Conçu pour le perçage des soudures par points

Information complémentaire

  • Le lot comprend : 1 outil de découpe de points de soudure de 9,5, 5 têtes de coupe de 9,5, 1 foret HSS/cobalt de 8 mm et 2 broches de perçage de rechange
  • Pour la découpe des points de soudure sur les panneaux de véhicules
  • Coffret de rangement métallique
  • Consommable et non couvert par la garantie Laser – Pièces de rechange disponibles

Spot welds: when replacing a spot-welded panel, whether repairing accident damage on a modern car or fitting new bodywork to a classic car, the spot-weld has to be removed cleanly and quickly, leaving the panel underneath undisturbed. Because of the spot-welding process, the metal around the spot-weld has become hardened, so it can be difficult to drill with an ordinary drill bit, plus this will damage the panel underneath. These three new sets from Laser Tools offer two different types of spot-weld remover and offer a complete solution for a variety of panel materials and spot-weld sizes.

The spot-weld cutter set (part number 7048) includes both types of spot-weld remover, the arbour-based spot-weld cutter, with spring-loaded guide pin, and an 8mm spot-weld drill, both designed for use with either electric or air-powered drills. The spot-weld cutter uses double-ended 9.5mm cutter heads which are quickly interchangeable. Six cutter heads are included. A shallow pilot hole is drilled in the centre of the spot-weld; the spring-loaded guide pin then sits in this pilot hole and the cutter then very quickly and accurately removes material around the spot-weld. Stop cutting when the top panel “pops” away from the panel underneath. The special 8mm spot-weld drill is manufactured from HSS cobalt (5%) steel for long life and is suitable for more specialist materials including galvanized high stress steels and alloys where excess heat may be generated. The drill features a special ground self-centring point and “mills” through spot welds to produce burr-free holes, the flat profile protecting the panel underneath.

The spot-weld cutter set (part number 7049) features the arbour-based spot-weld cutter and contains ten spare cutter heads. The spot-weld drill set (part number 7050) features four titanium-coated HSS cobalt (5%) steel spot-weld drills: 6.5mm x 45 long, 8mm x 45mm long, 10mm x 45mm long and 8mm x 79mm.

All three sets are supplied in sturdy, metal storage cases, and are available now from your Laser Tools stockist.

Consumable Item
 
Find a Local Stockist
Find
 
Search for an On-line Stockist