7585 USB 3D Printer Finishing Tool

CE Approved UK Conformity Assessed Chargable via USB

USB 3D print finishing tool, with 1.2m lead, is designed specifically to allow the user to smooth off thermo plastic materials after 3D printing. It can also be used for finishing plastic bumper repairs.

  • USB 3D print finishing tool works with most 3D print material and can also be used with other equipment for plastic bumper repair.
  • Supplied with a 1.2m USB lead and powered by standard USB socket (1 Amp current draw).
  • Heats up to 200°C in approx 15 seconds.
  • Max temp 400°C.
  • Folding stand included.
TSP: £10.98 ex VAT £13.18 inc VAT

USB 3D print finishing tool, with 1.2m lead, is designed specifically to allow the user to smooth off thermo plastic materials after 3D printing. It can also be used for finishing plastic bumper repairs.

  • Das USB-Nachbearbeitungswerkzeug für 3D-Drucker kann mit den meisten 3D-Druckmaterialien und auch mit weiteren Geräten zur Reparatur von Kunststoffstoßfängern verwendet werden.
  • Mit einem 1,2 m langen USB-Kabel, Betrieb über eine Standard-USB-Buchse, 1 A Stromaufnahme.
  • Erwärmung auf bis zu 185 Grad in ca. 12 Sekunden.
  • Max. Temp. 480 Grad.
  • Mit Klappständer.
TSP: £10.98 ex VAT £13.18 inc VAT

USB 3D print finishing tool, with 1.2m lead, is designed specifically to allow the user to smooth off thermo plastic materials after 3D printing. It can also be used for finishing plastic bumper repairs.

  • L'outil de finition et réparation plastique est utilisé pour des petites réparations. Il est utilisé dans le segment automobile typiquement pour des réparations de pare-chocs, de tableau de bord ou encore pour les amateurs réalisant des modèles 3D. Sa petite tête offre un excellente accès et permet des découpes.
  • Livré avec un cordon USB de 1,2 m et alimenté par une prise USB standard avec une consommation de 1 Amp.
  • Chauffe jusqu'à 185 ° en environ 12 secondes.
  • Temp. max. 480 °.
  • Support pliant inclus.
TSP: £10.98 ex VAT £13.18 inc VAT
CE Approved UK Conformity Assessed Chargable via USB
 Buy Locally

Press Release
USB-powered 3D print finishing tool from Laser Tools

This USB-powered 3D print finishing tool (part number 7585) has been specifically designed to allow the user to smooth off thermoplastic materials after 3D printing. Helps to smooth off rough edges and stepping lines between printed layers of your 3D prints. Can be used to remove support material and modify the part after printing if this is necessary.

7585_plus2.jpg">

It rapidly heats up to 200°C in just 15 seconds, and has a maximum temperature of 400°C; it features a 1.2m lead and is supplied with a folding stand. It can also be used for model-making and for other uses where thermoplastic needs to be worked and smoothed. Can even be used to finish off plastic car bumper repairs.

Very comfortable to use and extremely easy to control when precision is important. The tool is very good value and available now from your Laser Tools stockist.