Filling Funnel for AdBlue - Angled Part No. 6865

Product Videos

Typical Price:

£35.68 exc VAT
£42.82 inc VAT

Designed to screw directly on to the AdBlue tank filler neck where the vehicle is fitted with an angled filler neck (on the outside of the vehicle alongside the fuel filler neck or in the boot inner wing, etc.) The funnel has 2 valves. An anti-spill valve which opens automatically when the funnel is screwed tight on to the vehicle’s filler neck and a main valve which is manually operated by lifting the valve inside the funnel.

Additional Information

  • For safe transfer of adblue from storage containers to the vehicle tank Equipped with automatic anti-spill valve
  • 1100 ML transparent funnel with scale
  • Equipped with a lid to keep out dirt and debris when not in use
  • Air breather pipe to allow air out of the tank and prevent splashing caused by bubbling
  • For vertical AdBlue filler necks use Laser 6856 straight AdBlue funnel AdBlue is a registered brand of Verbrand der Automobilindustrie E V

Typical Price:

£35.68 exc VAT
£42.82 inc VAT

Designed to screw directly on to the AdBlue tank filler neck where the vehicle is fitted with an angled filler neck (on the outside of the vehicle alongside the fuel filler neck or in the boot inner wing, etc.) The funnel has 2 valves. An anti-spill valve which opens automatically when the funnel is screwed tight on to the vehicle’s filler neck and a main valve which is manually operated by lifting the valve inside the funnel.

Zusätzlichen Informationen

  • AdBlue ist eine eingetragene Marke des Verbands der Automobilindustrie e. V.
  • Mit Öffnungs-/Schließventil, transparenter Messskala
  • 45-Grad-Auslauf (gerader Auslauf erhältlich – Laser Teile-Nr. 6864)
  • Kapazität 1100 ml
  • AdBlue ist eine eingetragene Marke des Verbands der Automobilindustrie e. V.

AdBlue diesel exhaust fluid is a fact of life for the modern diesel engine, so to make life a bit easier Laser Tools have introduced these AdBlue Filling Funnels specially designed to screw directly onto the AdBlue filler neck. Two versions are available — straight (part number 6856) or angled access (part number 6865) — and they make the AdBlue filling process quick and easy, and best of all — no messy spillage!

Screw the funnel straight on to the AdBlue filler neck then lift the internal anti-spill valve. The funnel is large with a generous 1.1 litre capacity. Keep filling until the AdBlue fluid stops flowing into the vehicle’s reservoir, then simply drop down the internal valve. Now unscrew the funnel and lift it clear. There will no leaks or mess as you transfer the unused fluid back into the original container and leave a full AdBlue reservoir on the vehicle.

The angled AdBlue filler funnel is the same design as the straight version, with the internal anti-spill valve, but with an angled funnel connector. This is the one to use if the AdBlue filler neck is awkward to access or set at an angle.

AdBlue spillage can be costly, messy and once it dries the resulting white crystals can be difficult to remove. But not a problem if you are using one of these AdBlue filling funnels from Laser Tools. Professional solutions for the busy workshop. Available now from your Laser Tools stockist.

 
Find a Local Stockist
Find
 
Search for an On-line Stockist