7052 Alternator Pulley Tool Kit
An alternator pulley holding and removal kit for Denso, Valeo, Bosch and Marelli alternators.
- 3 x 1/2"D Combination Drivers: 31 Spline x M10 Spline x 15mm Hex, 31 Spline x T50 Star* x 15mm Hex and 17mm Hex (outer) x 10mm female Hex (inner).
- 3 x Sleeves: 32mm male Hex with 3 pin drive, 33 Spline drive x 15mm Hex (outer) and 28mm male Hex x 15mm male Hex drive.
- 1 x Bit Holder 10mm Hex x 1/2"D and 1 x Socket 10mm 12pt Female x 1/2"D.
- 2 Double ended Ring Spanners: 15mm, 10mm; 3 x 75mm long x 10mm Hex Drive Bits: M10 Spline, 8mm Hex and T50 Star* Bits and 1 x 30mm x 8mm Hex Drive x 10mm Hex.
- Bits manufactured from silicone steel; sockets and spanners from chrome vanadium.
- Star is the equivalent to TORX® - 6 sided. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.
TSP: £173.68 ex VAT £208.42 inc VAT
An alternator pulley holding and removal kit for Denso, Valeo, Bosch and Marelli alternators.
- 3x Kombi-Schraubendreher 1/2"-Antrieb: 31 XZN x M10 XZN x 20 mm Sechskant, 31 XZN x T50 Sechsrund x 20 mm Sechskant und 22 mm Sechskant (außen) x 15 mm Sechskant (innen)
- 3x Hülsen: 32 mm Sechskant außen mit 3-Stift-Antrieb, 33 XZN-Antrieb x 15 mm Sechskant (außen), 28 mm Sechskant außen x 15 mm Sechskantantrieb außen
- 1x Bithalter 10 mm Sechskant x 1/2"-Antrieb, 1x Steckschlüssel 10 mm 12 Punkte innen x 1/2"-Antrieb
- 2 Doppelringschlüssel: 15 mm, 10 mm plus 3x 75 mm lange x 10 mm Sechskant-Antriebsbits: Bits M10 XZN, 8 mm Sechskant und T50 Sechsrund plus 1x 30 mm x 10 mm Sechskantantrieb x 8 mm Sechskant
- Die Bits bestehen aus S2-Stahl, die Steckschlüssel und Schraubenschlüssel Chrom-Vanadium-Stahl
TSP: £173.68 ex VAT £208.42 inc VAT
Jeu d'outils pour alternateur Nippondenso 14 pièces
- 3 embouts mixtes à entraînement de 1/2" : 31 cannelures x M10 cannelé x 20 mm 6 pans, 31 cannelures x T50 étoile x 20 mm 6 pans et 22 mm 6 pans (extérieur) x 15 mm 6 pans femelle (intérieur)
- 3 manchons : 32 mm mâle 6 pans avec entraînement 3 broches, 33 cannelures x 15 mm 6 pans (extérieur), 28 mm mâle 6 pans x 15 mm mâle à entraînement hexagonal
- 1 porte-embout 10 mm 6 pans à entraînement de 1/2", 1 douille 10 mm 12 pans femelle à entraînement de 1/2"
- 2 clés polygonales : 15 mm, 10 mm plus 3 embouts de 75 mm de longueur à entraînement hexagonal de 10 mm : embouts M10 cannelé, 8 mm 6 pans et T50 étoile plus 1 x 30 mm x entraînement hexagonal 10 mm x 8 mm 6 pans
- Les embouts sont en acier S2 et les douilles et clés en chrome-vanadium
TSP: £173.68 ex VAT £208.42 inc VAT
Useful Downloads
Related Products
Press Release
Comprehensive Alternator Pulley Tool Kit
Overrunning alternator pulleys are becoming increasingly popular on many modern passenger cars and light commercial vehicles due to increased alternator loads. As opposed to traditional solid pulleys, they allow the alternator to free-wheel or overrun every time the engine decelerates and, at the same time, dampen vibrations at the alternator. Like any other part, overrunning alternator pulleys don’t last forever, and this is now a common replacement part. Proper tools are needed when working on these pulleys, and this new kit from Laser Tools (part number 7052) brings together the tools needed to remove and install the pulleys on Nippon Denso, Valeo, Bosch and Marelli alternators.
The kit is comprehensive, and includes three 1/2" drive combination drivers: an M10 spline driver with a 31 spline with 15mm hex, a 10mm female hex with a 17mm outer hex and a T50 star combined with 31 spline with 15mm hex. Three sleeves: 32mm male hex with 3-pin drive, 33 spline drive x 15mm hex (outer) and a 28mm male hex x 15mm male hex drive. A 1/2" drive 10mm bit holder is included, along with a 1/2" drive 10mm 12-point socket. The kit also features three 75mm long 10mm bit drivers, manufacturer from tough, shock-resisting S2 steel: an M10 spline, an 8mm hex and a T50 star.
Two double-ended ring spanners are included, both featuring a standard ring plus a handy ratchet ring; the 10mm spanner is 275mm long, and the 15mm spanner is 345mm long, useful lengths for reaching down into the engine bay. A 10mm to 8mm hex adaptor finishes the list.
Professional tools for the professional technician and available now from your Laser Tools stockist.
As an Amazon Associate I earn from qualifying purchases.
