7184 Pneumatic Diesel Bleeding Kit & Vacuum Fluid Extractor
Exclusive to Laser Tools! The 7184 kit combines the Laser Vacuum Pneumatic Fluid Extractor (Part No. 5780) with the Pneumatic Diesel Bleeding Connector Kit (Part No. 7174) to allow fast, effective bleeding and priming of vehicle diesel fuel systems after a filter change or whenever the fuel system has been opened for service or repair. Saving considerable time particularly where entire fuel lines have been emptied during service or repair.
- Snap connector male and female sizes: - 9.89mm, 9.49mm, 11.8mm, 7.89mm.
- Utilises standard workshop air systems to generate and maintain a steady vacuum for efficient bleeding and priming.
- Compatible for use with existing Laser fuel system bleed kits (See Part Nos. 5262, 5567, 5704). Vacuum Pneumatic fluid extractor also suitable for bleeding brake systems.
- Significant time saving over hand pump systems.
- Replacement connectors and additional sizes available from our Connect range of consumable products.
TSP: £132.10 ex VAT £158.52 inc VAT
Das Kit 7184 kombiniert die pneumatische Unterdruck-Absaugpumpe Laser 5780 mit dem pneumatischen Diesel-Entlüftungskit 7174 für ein schnelles und effektives Entlüften und Ansaugen von Dieselkraftstoffsystemen nach einem Filterwechsel oder nach dem Öffnen des Kraftstoffsystems für Service- oder Reparaturarbeiten. Das spart erheblich Zeit ein, insbesondere wenn während der Wartung oder Reparatur die Kraftstoffleitungen komplett entleert wurden.
- Schnappverbinder, Stecker und Aufnahme, Größen: 9,89 mm, 9,49 mm, 11,8 mm, 7,89 mm.
- Nutzt Standard-Druckluftsysteme von Werkstätten zur Erzeugung und Aufrechterhaltung eines stetigen Unterdrucks für das Entlüften und Ansaugen.
- Kompatibel zur Verwendung mit vorhandenen Laser Entlüftungskits für Kraftstoffsysteme (5262, 5567, 5704). Die pneumatische Unterdruck-Absaugpumpe ist auch zum Entlüften von Bremssystemen geeignet.
- Deutliche Zeitersparnis gegenüber Handpumpensystemen.
- Ersatzverbinder und weitere Größen aus unserem Connect-Sortiment an Verbrauchsmaterialien erhältlich.
TSP: £132.10 ex VAT £158.52 inc VAT
Le kit 7184 combine l'extracteur de fluide pneumatique à vide Laser 5780 et le kit de connecteurs de purge diesel pneumatique 7174 pour permettre la purge et l'amorçage rapides et efficaces des systèmes de carburant de véhicules diesel après un changement du filtre ou lorsque le système de carburant a été ouvert pour une révision ou une réparation. Gain de temps considérable surtout lorsque des conduites de carburant complètes ont été vidées au cours d'une révision ou d'une réparation.
- Tailles de connecteurs rapides mâles et femelles : 9,89 mm, 9,49 mm, 11,8 mm, 7,89 mm.
- Utilise les systèmes pneumatiques d'atelier standard pour générer et maintenir un vide stable pour une purge et un amorçage efficaces.
- Compatible avec les kits de purge de système de carburant Laser existants (5262, 5567, 5704). Extracteur de fluide pneumatique à vide également adapté à la purge des systèmes de freinage.
- Gain de temps important par rapport aux systèmes de pompage manuel.
- Connecteurs de rechange et tailles supplémentaires disponibles dans notre gamme Connect de produits consommables.
TSP: £132.10 ex VAT £158.52 inc VAT
Useful Downloads
Press Release
Fast, effective bleeding and priming of diesel fuel systems with this pneumatic bleeding kit
Our new pneumatic diesel bleeding kit enables fast and effective bleeding and priming of diesel fuel systems after a filter change, or whenever the fuel system has been opened for service or repair, perhaps after misfuelling. The new kit (part number 7184) combines the Laser 5780 vacuum pneumatic fluid extractor with the 7174 pneumatic diesel bleeding connector kit to offer a complete solution.
The fluid extractor uses standard workshop compressed air to generate a strong internal vacuum. The connector kit hooks straight up to the fluid extractor, the connectors and adaptors included enabling fitment to many common fuel systems.
This process saves considerable time, particularly where entire fuel lines have been emptied during service or repair. The strong vacuum will quickly pull the diesel fuel back through the system and even larger fuel filters take just a few seconds to fill. A useful feature of the kit is the clear disclosure pipe which lets the operator see when the diesel fuel has been bled through.
If you’re working on Ford, PSA or Renault (and certain VW/Audi) vehicles, a useful addition to the above kit is the 12-piece diesel fuel line blank set (part number 7098). These blanking pieces are designed to stop fuel flow and bleed-back from disconnected fuel pipes. The set includes six pairs of male and female blanking pieces (covering three different types of connector) and are simply clicked into the disconnected pipe connectors, sealing them off and considerably speeding up the job in hand.
Professional equipment for the professional workshop and available now from your Laser Tools stockist.
As an Amazon Associate I earn from qualifying purchases.
