8066 Swivel Spark & Glow Plug Socket Set 1/4"D, 3/8"D 6pc
A swivel spark and glow plug socket set for damage free removal and installation of spark and glow plugs, plus protective caps for PSG glow plugs.
- 1/4"D sizes: 8, 9mm x Single Hex (6pt). Overall length: 95mm.
- 3/8"D sizes: 10, 12, 16mm x Single Hex (6pt); 14mm x Bi-Hex (12pt). Overall length: 95mm.
- Special ball joint & long, slim design allows deep seated glow & spark plugs to be installed/removed with ease.
- 6 x plastic protective caps for PSG glow plugs.
- Sockets manufactured from satin finish chrome vanadium.
TSP: £110.24 ex VAT £132.29 inc VAT
Steckschlüsseleinsätze mit Gelenk für Zünd- und Glühkerzen zum beschädigungsfreien Aus- und Einbau von Zünd- und Glühkerzen, einschließlich Schutzkappen für Drucksensor-Glühkerzen (Pressure Sensor Glow Plug, PSG).
- Größen mit 1/4"-Antrieb: 8 und 9 mm x Einzelsechskant (6 Pkt.). Gesamtlänge: 95 mm.
- Größen mit 3/8"-Antrieb: 10, 12 und 16 mm x Einzelsechskant (6 Pkt.); 14 mm x Doppelsechskant (12 Pkt.). Gesamtlänge: 95 mm.
- Spezielles Kugelgelenk und lange, schmale Form für den problemlosen Ein- und Ausbau von tief sitzenden Zünd- und Glühkerzen.
- 6 Kunststoffschutzkappen für PSG-Glühkerzen.
- Einsätze aus Chrom-Vanadium-Stahl in matter Ausführung.
TSP: £110.24 ex VAT £132.29 inc VAT
Douille articulée pour bougies d'allumage et bougies de préchauffage, conçue pour la dépose et l'installation de ces bougies sans risque de dommage, avec capuchons de protection pour les bougies de préchauffage PSG.
- Carré de 1/4" tailles : 8 et 9 mm x hexagonale simple (6 pans). Longueur totale : 95 mm.
- Carré de 3/8" tailles : 10, 12, 16 mm x hexagonale simple (6 pans) ; 14 mm x bi-hexagonale (12 pans). Longueur totale : 95 mm.
- La conception spéciale longue et mince à rotule permet d'installer et de déposer facilement les bougies d'allumage et de préchauffage à siège profond.
- 6 capuchons de protection en plastique pour bougies de préchauffage PSG.
- Douilles en chrome-vanadium à finition satinée.
TSP: £110.24 ex VAT £132.29 inc VAT
Een draaidoppenset voor (gloei)bougies voor het schadevrij verwijderen en installeren van (gloei)bougies, plus beschermende doppen voor PSG-gloeibougies.
- 1/4"D maten: 8, 9 mm x enkele zeskant (6-punts). Totale lengte: 95 mm.
- 3/8"D maten: 10, 12, 16 mm x enkele zeskant (6-punts); 14 mm x dubbele zeskant (12-punts). Totale lengte: 95 mm.
- Speciaal kogelgewricht en lang, slank ontwerp om diepliggende (gloei)bougies gemakkelijk te kunnen installeren/verwijderen.
- 6 beschermdoppen voor PSG-gloeibougies.
- Doppen gemaakt van chroom-vanadium met satijnen afwerking.
TSP: £110.24 ex VAT £132.29 inc VAT
Useful Downloads
Related Products
Press Release
When access is difficult, reach for this new compact, swivel-headed spark plug and glow plug socket set
Within the tightly-packaged modern engine bay, access to spark plug and glow plugs can be difficult to say the least. This new Swivel Spark and Glow Plug Socket Set from Laser Tools (part number 8066) features slim, compact, swivel-headed sockets designed for difficult to access areas and the 95mm length allows even deep-seated plugs to be removed with ease.
Six of the swivel-headed sockets are included — 1/4" drive sizes: 8, 9mm x single hex (6pt) and 3/8" drive sizes: 10, 12, 16mm x single hex (6pt); 14mm x bi-hex (12pt).
8066_plus2.jpg">When fitting new Pressure Sensor Glow plugs (PSG), or refitting existing ones (perhaps after performing a compression test), particular care must be taken not to let the electrical connector on the end of the plug become damaged from dirt ingress or electrostatic charging — six plastic protective caps are also provided in the set for this purpose. These are fitted to the glow plug during installation, then removed before refitting the electrical connection.
This useful set is available now from your Laser Tools stockist.
As an Amazon Associate I earn from qualifying purchases.
