Clamping Washer Tool - VAG/Ford Part No. 7347

Product Videos

Typical Price:

£28.70 exc VAT
£34.44 inc VAT

Clamping Washers are used by many manufacturers to hold in place underbody heat shields and sound deadening materials. They are light weight sprung steel washers that push on to and grip a simple coarsely threaded pin that is permanently attached to the vehicle body. Unfortunately they can be tricky to remove once corroded without breaking them or bending the pin. The Laser 7347 has been developed specifically to assist in the removal and fitting of these Clamping Washers. Designed to fit onto the 32mm diameter washers, the 2 steel pins engage with the washer and allow a cordless drill or any ¼ drive wrench to be used to spin the washer and allow it to “wind” its way off. This method of removal helps avoid breaking the clip, damaging the pin and also helps reduce the chance of the mechanic cutting themselves on the sharp edged clips particularly when they break.

Additional Information

  • For the quick and safe removal/fitting of clamping washers which are used on underbody heat shields etc
  • Applications include: Audi, Seat, Skoda and Volkswagen OE N90335004, N90335006, N90796501 and Ford OE 6715468
  • The clips are also found on many other vehicle marques
  • 1/4"D with quick chuck end for use with 1/4"D wrenches, drivers or with cordless drills
  • Compatible with connect Clamping Discs 36149, 36150 & 36571 for VAG. Patented product

Typical Price:

£28.70 exc VAT
£34.44 inc VAT

Werkzeug zum Entfernen und Einsetzen von Klemmscheiben, 1/4"-Antrieb, zur Verwendung mit einem Akku-Bohrschrauber. Dient zum Entfernen und Einsetzen von Klemmscheiben zur Befestigung von relativ empfindlichen Unterboden-Hitzeschilden usw.

Zusätzlichen Informationen

  • Für den schnellen und sicheren Ein-/Ausbau von Klemmscheiben für Unterboden-Hitzeschilde usw.
  • Einsatzmöglichkeiten u. a.: Audi, Seat, Skoda und Volkswagen OE N90335004, N90335006, N90796501 und Ford OE 6715468
  • Die Clips sind auch bei vielen weiteren Fahrzeugmarken zu finden.
  • 1/4"-Antrieb mit Schnellspannfutter zur Verwendung mit Schlüsseln mit 1/4"-Antrieb, Treibern oder mit Akku-Bohrern
  • Kompatibel mit Connect-Klemmscheiben 36149 und 36150 für VAG

Typical Price:

£28.70 exc VAT
£34.44 inc VAT

Outil de dépose et d'installation de rondelles d'arrêt à carré de 1/4", conçu pour être utilisé avec une perceuse sans fil pour déposer et installer les rondelles d'arrêt utilisées pour fixer les boucliers thermiques relativement délicats placés sous la caisse, etc.

Information complémentaire

  • Pour la dépose et l'installation rapides et en toute sécurité des rondelles d'arrêt qui sont utilisées sur les boucliers thermiques placés sous la caisse, etc.
  • Les applications comprennent : Audi, Seat, Skoda et Volkswagen OE N90335004, N90335006, N90796501 et Ford OE 6715468
  • Les agrafes sont également présentes sur de nombreuses autres marques de véhicules
  • Carré de 1/4" avec extrémité à mandrin rapide pour une utilisation avec des clés, des poignées ou des perceuses sans fil à carré de 1/4"
  • Compatible avec les disques d'arrêt Connect 36149 et 36150 pour VAG

Clamping Washers are used by many manufacturers to hold in place underbody heat shields and sound deadening materials. They are light weight sprung steel washers that push on to and grip a simple, coarsely threaded stud that is permanently attached to the vehicle body. Unfortunately they can be tricky to remove once corroded without breaking them or bending the stud. This useful clamping washer tool (part number 7347) has been specifically developed to make the removal and fitting of these clamping washers and easy and straightforward task.

Designed for the 32mm diameter washers, the two steel pins engage with the washer and allow a cordless drill or any ¼" drive wrench to be used to spin the washer and allow it to wind its way off. This method of removal helps avoid breaking the clip, damaging the pin and also helps reduce the chance of the operator cutting themselves on the sharp edged clips, particularly when they break.

Applications include: Audi, Seat, Skoda and Volkswagen (OE washer numbers, N90335004, N90335006, and N90796501) and Ford OE 6715468. This type of clamping washer is also found on many other vehicle marques. Compatible with clamping washers from our Connect Workshop Consumables range: part numbers 36149, 36150 & 36571 (all for VAG).

You’ll wonder how you did without it. A professional tool for the professional workshop and available now from your Laser Tools stockist.

 
Find a Local Stockist
Find
 
Search for an On-line Stockist