Flywheel Locking Tool - Multi Application Part No. 7511

Product Videos

Typical Price:

£39.38 exc VAT
£47.26 inc VAT

The 7511 Flywheel Locking Tool is a Laser Tools EU registered design. Unique in its design and simplicity, the 7511 tool is designed to allow the user to quickly and simply lock the flywheel via the ring gear when removing the clutch, flywheel or front pulleys during engine strip down or clutch replacement. The 7511 can also be used to lock the ring gear when checking the dual mass flywheel play.

Additional Information

  • Ideal assistant when removing dual mass flywheels, clutches etc.
  • Unique “saw tooth design” for ease of adjustment and locking
  • Supplied with M10 and M12 bolts to fit in bell housing bolt holes.
  • Supplied with spacers to allow for spacing off the engine block.
  • EU registered Design – Made in Sheffield.

Typical Price:

£39.38 exc VAT
£47.26 inc VAT

Das Arretierwerkzeug für die Schwungscheibe 7511 ist ein in der EU geschütztes Design von Laser Tools. Das in seiner Konstruktion und Einfachheit einzigartige Werkzeug 7511 ermöglicht es dem Benutzer, die Schwungscheibe schnell und einfach über den Zahnkranz zu arretieren, wenn die Kupplung, die Schwungscheibe oder die vorderen Riemenscheiben bei der Demontage des Motors oder beim Austausch der Kupplung entfernt werden müssen. 7511 kann auch dazu genutzt werden, den Zahnkranz zu arretieren, wenn das Spiel einer Zweimassenschwungscheibe überprüft wird.

Zusätzlichen Informationen

  • Ideale Hilfe beim Ausbau von Zweimassenschwungscheiben, Kupplungen usw.
  • Einzigartige „Sägezahn-Gestaltung“ für einfache Einstellung und Arretierung
  • M10- und M12-Schrauben im Lieferumfang enthalten, die in die Bohrungen der Gehäuseschrauben passen.
  • Abstandhalter im Lieferumfang enthalten, um den Abstand zum Motorblock herzustellen.
  • In der EU geschütztes Design – Hergestellt in Sheffield.

Typical Price:

£39.38 exc VAT
£47.26 inc VAT

L'outil de blocage de volant-moteur 7511 est une conception Laser Tools déposée UE. Unique par sa conception et sa simplicité, l'outil 7511 est conçu pour permettre à l'utilisateur de bloquer rapidement et simplement le volant-moteur par sa couronne dentée lors de la dépose de l'embrayage, du volant-moteur ou des poulies avant pendant un démontage du moteur ou un remplacement de l'embrayage. Le 7511 peut également être utilisé pour bloquer la couronne dentée lors de la vérification du jeu du volant-moteur bi-masse.

Information complémentaire

  • Assistant idéal pour la dépose de volants-moteur bi-masse, d'embrayages, etc.
  • Conception unique « en dents de scie » pour faciliter le réglage et le blocage
  • Livré avec des boulons M10 et M12 adaptés aux trous des carters.
  • Livré avec les entretoises pour permettre un écartement par rapport au bloc-moteur.
  • Conception déposée UE – Fabriqué à Sheffield

Typical Price:

£39.38 exc VAT
£47.26 inc VAT

The 7511 Flywheel Locking Tool is a Laser Tools EU registered design. Unique in its design and simplicity, the 7511 tool is designed to allow the user to quickly and simply lock the flywheel via the ring gear when removing the clutch, flywheel or front pulleys during engine strip down or clutch replacement. The 7511 can also be used to lock the ring gear when checking the dual mass flywheel play.

Information complémentaire

  • Ideal assistant when removing dual mass flywheels, clutches etc.
  • Unique “saw tooth design” for ease of adjustment and locking
  • Supplied with M10 and M12 bolts to fit in bell housing bolt holes.
  • Supplied with spacers to allow for spacing off the engine block.
  • EU registered Design – Made in Sheffield.

Locking the crankshaft is an essential job when carrying out many maintenance and repair tasks on modern engines. Often when the engine has been removed from the vehicle and the gearbox separated, there is no easy way to lock the crankshaft. The new Laser Tools flywheel locking tool (part number 7511) is unique in its design and simplicity and allows the user to quickly and simply lock the flywheel via the ring gear when the engine has been separated from the gearbox. This will allow, for example, the removal of the flywheel or front pulley retaining bolts, or keeping the crankshaft locked when checking play on a dual mass flywheel.

This is a multi-application tool that is designed to fit a wide range of engines. It has been designed and manufactured in Sheffield by Laser Tools and is an EU registered design. It is very easy to adjust and lock in position, bolting onto a convenient bell housing hole. The tool is supplied with M10 and M12 mounting bolts for securing to the bellhousing hole and a selection of spacers to align the tool correctly to the ring gear.

A professional tool designed for the professional workshop and available from your Laser Tools Supplier.

Made in the United Kingdom Made in Sheffield EU Registered Design
 
Find a Local Stockist
Find
 
Search for an On-line Stockist