Stud Remover & Installer 9pc Part No. 7804

Typical Price:

£60.08 exc VAT
£72.10 in VAT

A stud remover and installer kit designed to allow the extraction and fitting of studs without damage. The specially designed fitting tools allow the stud to be correctly torqued up without risk of damage to the stud thread.

Additional Information

  • Contents: M6 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5 & 6mm Hex Key.
  • Suitable for the most popular cylinder head and manifold stud sizes.
  • Use 6mm Hex key (supplied) to lock the tool on to the stud.
  • Packed in an EVA foam storage tray.

Typical Price:

£60.08 exc VAT
£72.10 in VAT

Bolzenausdreher und –eindreher, 9-teilig

Zusätzlichen Informationen

  • Zum Lösen und Festziehen von Bolzen ohne Beschädigung des Gewindes.
  • Inhalt: M6 x 1,0, M8 x 1,25, M10 x 1,25, M10 x 1,5 und 6-mm-Inbusschlüssel
  • Für die gängigsten Größen von Zylinderkopfschrauben und Stehbolzen geeignet.
  • Zum Einrasten des Werkzeugs am Bolzen den beiliegenden 6-mm-Inbusschlüssel verwenden.
  • In einer EVA-Schaumstoff-Ablageschale verpackt.

Typical Price:

£60.08 exc VAT
£72.10 in VAT

A stud remover and installer kit designed to allow the extraction and fitting of studs without damage. The specially designed fitting tools allow the stud to be correctly torqued up without risk of damage to the stud thread.

Information complémentaire

  • Contenu : M6 x 1,0, M8 x 1,25, M10 x 1,25, M10 x 1,5 et clé hexagonale de 6 mm.
  • Convient pour les tailles les plus courantes de goujons de culasses et de collecteurs.
  • Utiliser la clé hexagonale de 6 mm fournie pour bloquer l'outil sur le goujon.
  • Présenté dans un plateau de rangement en mousse EVA.
  • Présenté dans un plateau de rangement en mousse EVA.

Typical Price:

£60.08 exc VAT
£72.10 in VAT

Boutenverwijderaar en -montagegereedschap - 9 st

Zusätzlichen Informationen

  • Voor het verwijderen en aanbrengen van moeren zonder schade aan de schroefdraad.
  • Inhoud: M6 x 1,0, M8 x 1,25, M10 x 1,25, M10 x 1,5 & 6 mm inbussleutel.
  • Geschikt voor de meest populaire cilinderkop- en spruitstukmaten.
  • Gebruik de bijgeleverde 6 mm inbussleutel om het gereedschap op de pen te vergrendelen.
  • Verpakt in een bewaartray van EVA-schuim.
When removing or installing studs, it's important not to damage the threads. This new stud remover and installer from Laser Tools (part number 7804) lets you remove studs from cylinder heads, etc, without damaging them. It also lets you install new studs tightly and firmly without damaging the new stud threads and enables a torque wrench to be used if required.

Four sizes of remover and installer are provided, covering the most common head and manifold stud sizes: M6 x 1.0, M8 x 1.25, M10 x 1.25 and M10 x 1.5. To remove a stud, screw on the remover until the outer nut section reaches the stud tip. Now turn the inner section anticlockwise until the stud is removed. The stud remover grips the stud firmly without compressing or damaging the threads.

When fitting a new stud it needs to be firmly seated and again, we don't want to compress or otherwise damage the threads. Screw the correctly-sized installer onto the new stud until it reaches the internal ball and won't screw on any further. With the installer now locked firmly onto the stud, screw the stud into the stud hole. Now torque the stud to the manufacturer’s specification. Unlock the installer with the supplied 6mm hex key — the installer can now be easily removed leaving clean, undamaged threads on the stud.

The set is supplied in a foam tray to fit neatly in the tool tray. Available now from your Laser Tools stockist.
 
Find a Local Stockist
Find
 
Search for an On-line Stockist