6576 Rack End Removal/Installer Set 3pc
For the removal and installation of the axle joint track rod from the steering rack.
- Includes three seperate heads: 30 - 35mm, 35 - 40mm and 40 - 45mm.
- Complete with drive shaft - length 405mm.
- Drive 32mm Hex or 1/2"D.
TSP: £259.64 ex VAT £311.57 inc VAT
For the removal and installation of the axle joint track rod from the steering rack.
- Für Aus- und Einbau des Achsengelenks, der Spurstange von der Lenkzahnstange
- Der Satz umfasst drei separate Köpfe: 30-35 mm, 35-40 mm, 40-45 mm
- Komplett mit Antriebswelle – Länge 405 mm
- Antrieb 32 mm Sechskant oder 1/2"-Antrieb
- Lieferung in Hartschalenkoffer
TSP: £259.64 ex VAT £311.57 inc VAT
Pour la dépose et l'installation du joint d'axe et de la tringle de direction à partir de la crémaillère de direction.
- Permet de déposer et d'installer la rotule axiale
- Ce kit contient 3 différentes têtes : 30-35mm, 35-40mm, 40-45mm
- Complet avec outil mesurant 405mm de long
- Entraînement en 6 pans en 32mm ou en 1/2"
- Fourni dans une boite de rangement moulée
TSP: £259.64 ex VAT £311.57 inc VAT
Onderdeel van het Laser-gamma van gereedschappen voor het uitbouwen van het tandheugeluiteinde
- Voor het verwijderen en installeren van de askoppeling en de koppelstang van de stuurkolom
- De set bevat drie afzonderlijke koppen: van 30 - 35 mm, 35 - 40 mm en 40 - 45 mm
- Compleet met aandrijfas - lengte 405 mm
- Aandrijfzeskant 32 mm of 1/2"D
- Geleverd in een blaasgegoten koffer
TSP: £259.64 ex VAT £311.57 inc VAT
Useful Downloads
Related Products
Press Release
New rack end remover / installer set
When removing the track rod to replace the inner ball joint, very often access is limited, and even if there is a hex on the inner ball joint you won’t get a spanner anywhere near it. The new Laser Tools rack end remover tool, (part number 6576) overcomes this access problem by fitting over the track rod itself and gripping the inner ball joint at the steering rack end securely.
Three sizes are included in the kit (30-35mm, 35-40mm and 40-45mm), all of which adjust themselves to grip any type of inner ball joint, hex to completely round, the ball joint will be gripped firmly.
The tool is turned with a 32 millimetre hex or, very usefully, with a half-inch drive. The track rod and inner ball joint will be removed in seconds. And when installing the new inner ball joint, the half-inch drive makes it easy to tighten to the correct manufacturer’s torque setting.
Another time saving, innovative solution from Laser Tools and available now from your local supplier.
As an Amazon Associate I earn from qualifying purchases.
