7948 Insulated Torque Screwdriver 1 - 6Nm

IEC Hex Profile Tools suitable for working on Hybrid Vehicles Clockwise Torque Calibration Certificate Manufactured from Chrome Vanadium

Torque driver with slipper clutch action to prevent over tightening of low torque screws and bolts. Ideal for use on hybrid and electric vehicle applications when working on mechanically sensitive small fixings such as power controller boards.

  • Range: 1 - 6Nm in 0.1Nm increments; tolerance ±6%.
  • Overall length: 205mm, with 6.3mm (1/4") Hex drive for bits.
  • Safe operator use for live voltages up to 1000V AC / 1500V DC (VDE / IEC60900 approved).
  • ISO6789:2017 with certificate of conformity.
  • All Laser torque wrenches (mechanical & digital) are supplied with a certificate of conformance & calibration produced at point of manufacture, as per ISO6789-1:2017
TSP: £207.90 ex VAT £249.48 inc VAT

Drehmoment-Schraubendreher mit Rutschkupplung, um ein Überziehen von Schrauben und Bolzen mit niedrigem Anzugsmoment zu verhindern. Ideal für den Einsatz bei Elektro- und Hybridfahrzeugen, wenn empfindliche kleine Befestigungsschrauben, wie beispielsweise an Leistungsreglern, anzuziehen sind.

  • Bereich: 1-6 Nm, in 0,1-Nm-Schritten; Toleranz ±6 %. (ISO 6789:2017) mit Konformitätsbescheinigung.
  • Leicht ablesbare Lasergravur-Skala mit Rutschkupplung, die durchrutscht, sobald das Anzugsmoment erreicht ist, um ein Überziehen zu verhindern.
  • Gesamtlänge: 205 mm, mit 6,3-mm-Sechskant-(1/4"-)Antrieb für Bits.
  • Sichere Verwendung bei anliegender Spannung von bis zu 1000 VAC / 1500 VDC (ISO 60900:2004).
  • Ergonomisches Greifen durch praktischen, rutschfesten Gummigriff.
TSP: £207.90 ex VAT £249.48 inc VAT

Tournevis dynamométrique avec action d’embrayage limiteur pour éviter de trop serrer les vis et boulons de faible couple. Idéal pour utilisation sur véhicules hybrides et électriques lors de travaux sur de petites fixations mécaniquement sensibles comme les cartes de contrôleur de puissance.

  • Plage : 1 - 6 N.m par incréments de 0,1 N.m ; tolérance de ± 6 %. ( ISO6789:2017 ) avec certificat de conformité.
  • Échelle gravée au laser facile à lire, avec embrayage limiteur conçu pour glisser quand la valeur de couple est atteinte afin d'éviter un serrage excessif.
  • Longueur totale : 205 mm, avec entraînement hexagonal de 6,3 mm (1/4") pour embouts.
  • Utilisation en toute sécurité pour l’opérateur à des tensions pouvant aller jusqu'à 1 000 V CA/1 500 V CC (ISO 60900:2004).
  • Forme ergonomique avec poignée en caoutchouc de confort antidérapante.
TSP: £207.90 ex VAT £249.48 inc VAT

Torque driver with slipper clutch action to prevent over tightening of low torque screws and bolts. Ideal for use on hybrid and electric vehicle applications when working on mechanically sensitive small fixings such as power controller boards.

  • Bereik: 1 - 6 Nm in stappen van 0,1 Nm; tolerantie ±6%.
  • Totale lengte: 205 mm, met 6,3 mm (1/4") aandrijfzeskant voor bits.
  • Veilig voor gebruik tot spanningen van max. 1000 V AC / 1500 V DC ( VDE/IEC60900-gecertificeerd).
  • ISO6789:2017 met conformiteitsverklaring.
TSP: £207.90 ex VAT £249.48 inc VAT
IEC Hex Profile Tools suitable for working on Hybrid Vehicles Clockwise Torque Calibration Certificate Manufactured from Chrome Vanadium
 Buy Locally

Press Release
Insulated torque tools rated at 1000V AC / 1500V DC

Part of the large Laser Tools range of insulated tools and safety products for electric and hybrid vehicles, these torque tools are manufactured to IEC60900 standards for 1000vAC / 1500vDC live working. 

This torque wrench (part number 5481) uses a 'slipper' type release mechanism instead of a traditional click mechanism. When the wrench arrives at the set torque it will slip and continue to slip until the load is removed. Any subsequent application of torque will result in the wrench continuing to slip ensuring the set limits cannot be accidently overridden as can happen with more traditional click type wrenches.

If torque angle has to be applied after the applied torque value has been reached, then then this digital magnetic angle gauge (part number 7560) is self-calibrating, measures 0-360° with ±2% accuracy and is manufactured to EN61326-1 & 2 approved and EU2004, 108, EC compatible standards. The angle gauge is attached to the torque wrench, ratchet or swivel bar, and also attaches to insulated versions for high-voltage applications.

For accurate torque application to low-torque screws and bolts, the insulated torque screwdriver (part number 7948) also features a slipper clutch action to prevent overtightening when working on mechanically-sensitive small fixing such as found on power controller boards, etc. The torque range is 1-6Nm in 0.1Nm increments and again is safe for operators to use for live voltages up to 1000vAC / 1500vDC.

Indispensable when working on electric and hybrid vehicles, these tools are available now from your Laser Tools stockist.



Buy Online from